Color Veneer Sampler
Have you ever thought of doing a cool small project like toe stops, jewelry, ornaments or marquetry? This product may be perfect for you!
These smaller sized sheets (25 x 10") are not large enough for our skateboard kits unless pieced together. Colours are random, what you see here is an indication of the range of colours in each pack.
What you get:
- 50 assorted sheets of multi-coloured dye-infused maple veneer
- Each sheet is 25" long x 10" wide x 1/16" thick
- the box contains approximately 12500 in² of veneer
(Note: the sheet size and number has changed slightly from our original product)
Trim pieces with a heavy matt knife
We recommend using a Thin Air Press vacuum bag to laminate your creative projects with this pack of veneer pieces.
With Titebond III and your imagination, glue up your designs as flat shapes, or bend them over a mold inside the TAP bag.
As with the other larger sheets of veneer, keep them away from any heat sources to prevent warping and cracking.
Q: Can I make my own wood by soaking it in dye?
A: You will only get a surface colouring this way. Our sheets have been infused using pressure, so the colour gets deeper into the veneer.
Q: Can I paint my design over the color?
A: Yes, it is not as waxy as some hand-stains are, so it takes acrylic and spray paints just fine.
Q: What types of glue work with this colour veneer?
A: Same glue you would use for your other woodworking projects, PVA glues such as Titebond III, epoxy.